11.4
Symbols in graphics/instructions
11.4.1
Menu elements
12.3
4.1.0.0
4.4.3.0
±
2.0.0.0
E000
11.4.2
Actions
ON
X
ON
X
Installation and operating instructions • Wilo-CronoLine-IL-E, Wilo-CronoTwin-DL-E, Wilo-CronoBloc-BL-E • Ed.01/2024-02
Symbol
Description
BMS (Building Man-
agement System) is
active
DP/MP operating
mode:
Parallel operation
Table 19: Standard symbols of status display
In the "Operating instructions" chapter, graphics are used to illustrate the operating
concept and setting instructions.
The following symbols are used to simplify the display of menu elements or actions:
•
Menu status page: standard view on the display.
•
"One level down": A menu element with subordinate menu levels which you can switch
to (e.g. <4.1.0.0> to <4.1.1.0>).
•
"Information": A menu element with information about the device status or settings that
cannot be changed.
•
"Selection/setting": A menu element that provides access to a changeable setting (ele-
ment with menu number <X.X.X.0>).
•
"Level up": A menu element with superordinate menu levels which you can switch to (e.g.
<4.1.0.0> in <4.0.0.0>).
•
Menu error page: In case of a fault, the current error number is displayed instead of a
status page.
•
Turn the operating button: Turn the operating button to increase or decrease settings or
menu numbers.
•
Press the operating button: Press the operating button to activate a menu element or
confirm a change.
•
Navigate: Follow the instructions below to navigate until the displayed menu number is
reached.
•
Wait time: The remaining time (in seconds) is displayed until the next state is reached au-
tomatically or a manual input can be made.
•
Set DIP switch to "OFF" position: Set DIP switch number "X" under the housing cover to
the "OFF" position.
•
Set DIP switch to "ON" position: Set DIP switch number "X" under the housing cover to
the "ON" position.
Symbol
Description
Pump stopped in
emergency opera-
tion
(icon flashes)
DP/MP operating
mode:
Main/reserve
en
129