Allmand NIGHT-LITE GR Serie Manuel D'utilisation page 26

Cleaning
WARNING
Entanglement / Sever Hazard
Failure to shut down the engine before cleaning the unit
could result in death or serious injury. Always shut down
the engine before cleaning the unit.
WARNING
Burn Hazard
Shut down the engine and let components cool before
cleaning the unit. Failure to do so could result in serious
burns.
NOTICE
Use caution when using compressed air or water / steam
pressure washers. Do not pressure–clean electrical
components, as this may cause damage.
Keeping the light tower clean is important to ensure
proper operation. Dirt and dust buildup acts as an
insulator and may cause the engine, generator and light
assemblies to operate at excessively high temperatures.
Use the following as cleaning guidelines:
1. Clean the light tower trailer to remove all dust, dirt or
other foreign material.
2. Clean the light tower and light fixture assemblies with
a damp cloth or sponge.
3. Clean all electrical wiring and components by hand
using non-corrosive cleaner.
4. Clean the inside of the engine compartment.
5. Clean any oil or liquid spills inside the engine
compartment.
Models and Serial Numbers
Model and serial number information is required for
product support and repair parts. Following are the model
and serial number locations of the primary components.
Trailer
The serial number tag for the light tower trailer is located
on the left side of the trailer tongue (A, Figure 29).
26
29
Generator
The generator has a serial number plate (A, Figure 30)
attached to the top of the housing.
30
Kubota Engine
The engine has a serial number plate (A, Figure 31)
attached to the top of the engine.
A
A
www.allmand.com