Allmand NIGHT-LITE GR Serie Manuel D'utilisation page 21

Lowering the Light Tower - Manual Winch (Standard)
1. Shut down the engine. See Operating the Engine.
Wait 10 minutes for the lights to cool.
2. Turn the winch handles (A, Figure 20) until the tower
is fully lowered. Do not overturn the handles.
20
Raising the Light Tower - Electric Winch (Optional)
1. Shut down the engine. See Operating the Engine.
Wait 10 minutes for the lights to cool.
2. Before raising the light tower, adjust the tower lights
to the desired work position. See Adjusting the
Lights.
3. Open the engine compartment cover.
4. Press and hold the tower raise switch (A, Figure 21)
in the up position until the tower is fully raised.
Lowering the Light Tower - Electric Winch (Optional)
1. Shut down the engine. See Operating the Engine.
Wait 10 minutes for the lights to cool.
2. Press and hold the tower raise switch (B, Figure 21)
in the down position until the tower is fully lowered.
21
Operating the Tower Lights
WARNING
A
Optical Hazard
Looking at illuminated light fixtures could result in serious
injury. Never look directly at illuminated light fixtures.
Turning the Lights On
The tower lights will automatically turn on after the engine
is started. However, the main light breaker or individual
light switches may be set to OFF.
• Turn on the main light breaker (A, Figure 22) (if set to
OFF).
• Turn on individual light switches (B, Figure 22) (1 - 4,
if set to OFF).
The breaker / switches may also be used if manual and
individual light control is desired.
Turning the Lights Off
Shut down the engine to turn the lights off. See
Operating the Engine. (The lights can also be turned off
manually. See Turning the Lights On.)
A
B
en
21
English