Intended Use; Restrictions; Predictable Misuse - Burkert 2651 Manuel D'utilisation

Types 2651, 2654, 2660,
IntendedUse
2 INTENDED USE
The ball valves types 2651, 2654 and 2660 (in general below as "Ball
valves") are intended for the installation to pneumatic or electric rotary
actuators. They can be used indoors as well as outdoors, in compliance
with the permissible operating conditions.
Non-intended use of the ball valves can be dangerous to
people, nearby equipment and the environment.
▶ The ball valves are used for shutting off media flows in a wide
range of industrial applications.
▶ The ball valves may be used only in conjunction with third-party
devices and components recommended and authorized by Bürkert.
▶ During use observe the authorised data and operating conditions
specified in the contract documents and operating instructions
as well as the range of applications described in "5.1 Intended
Application Area".
▶ Correct transportation, correct storage and installation and careful use
and maintenance are essential for reliable and faultless operation.
▶ Use the ball valves only as intended.
TKU 001
2.1

Restrictions

If exporting the System/Device, observe any existing restrictions.
2.2 Predictable Misuse
• Operate the ball valves only with media which do not corrode the
housing or seal material.
• Do not physically stress the housing (e.g. by placing objects on it
or standing on it).
• Do not make any external modifications to the housing.
english
5