MINN KOTA TERROVA Manuel Du Propriétaire page 21

Considerations for Connecting and Routing Built-in MEGA Down Imaging
If Built-in MEGA Down Imaging is pre-installed on your trolling motor, one Built-in MEGA Down Imaging accessory cable will exit the base
of the Control Head and run down the center of the Coil Cord. Built-in MEGA Down Imaging requires cables to be connected to an output
device such as a Humminbird® fish finder. The Built-in MEGA Down Imaging cable that exits the Coil Cord is "Apex and Solix Ready".
Connecting the trolling motor equipped with a Built-in MEGA Down Imaging transducer to a compatible fish finder gives you a 2D sonar
view of what is happening directly below your trolling motor. To determine if your fish finder is compatible with Built-in MEGA Down
Imaging, please visit minnkotamotors.com
plugged directly into a Solix or Apex, directly into an Extension Cable or directly into a Humminbird® Helix Adapter Cable.
EXTENSION CABLES - The Built-in MEGA Down Imaging cable from the trolling motor may not be long enough to reach your fish finder. If
the cable length does not reach the desired fish finder installation location, extension cables are available. A 10-foot extension cable
(EC M3 14W10 - 10' transducer extension cable -
cable - 720106-2) are available from humminbird.com. Both the 10-foot and 30-foot extension cables also come "Apex and Solix Ready".
The Extension Cables may plug directly into a Solix or Apex or directly into a Helix Adapter Cable.
HUMMINBIRD HELIX ADAPTER CABLES
will allow the connection of any compatible Humminbird® Helix fish finder. The 490537-2 MKR-MI-1 is used on Helix 8, 9, 10, 12 and 15
G2N models and newer. The 490518-1 MKR-MDI-2 is used for Helix 7 G3, G4, G3N and G4N models. The Helix adapter cables will plug
directly into the Helix fish finder.
OTHER FISH FINDER ADAPTER CABLES
adapter cables online at minnkotamotors.com.
Built-in MEGA Down Imaging Connections
Control Head Control Head
Built-in MEGA Built-in MEGA
Down Imaging Down Imaging
Advanced GPS Advanced GPS
Ethernet Ethernet
Connector Connector
Coil Coil
Cord Cord
Mount Mount
©2023 Johnson Outdoors Marine Electronics, Inc.
to check compatibility. The Built-in MEGA Down Imaging cable from the trolling motor may be
720106-1) and a 30-foot extension cable
- If connecting to a Humminbird® Helix fish finder, an adapter cable accessory is included that
- If connecting to other fish finders on the market, check for compatibility or any required
Built-in MEGA Built-in MEGA
Down Imaging Down Imaging
Foot Pedal Foot Pedal
Power Leads Power Leads
Power Connector Power Connector
BUILT-IN MEGA DOWN IMAGING
(EC M3 14W30 - 30' transducer extension
Extension Extension
Cable Cable
(if needed) (if needed)
Directly Directly
to Solix to Solix
or Apex or Apex
Helix Adapter Helix Adapter
Cable Cable
(provided) (provided)
To Helix To Helix
minnkotamotors.com | 21