Pando PHB-861 Manuel D'utilisation page 248

INOXPAN S.L. Pando
Rails
When you want to give the runners and cavity a good cleaning, you can remove
the shelves and clean them. In this way, your oven will retain its appearance and remain fully
functional for a long time to come.
In order to disassemble and assemble the guides correctly without damaging the product, you
should do so as follows:
1. Pull the front part of the rails horizontally towards the inside of the oven (following the
direction of the arrow
pulled out as shown in the picture.
2. To replace the rails, the rails protruding from the rear of the rails must be fitted correctly
into the cavities on the inside of the oven.
a. First insert the rods of the rear part into the corresponding holes and then insert
the front part into the hole.
) until the element comes out; the rails can then be
1
2
48
3
EN
PHB-861
PHTV-862
PHP-864