Pando PHB-861 Manuel D'utilisation page 234

INOXPAN S.L. Pando
Timer
You can use the timer function by touch
will beep to remind you. At the first touch of, set the timer by hours, then touch again and
set the timer by minutes. Touch
You can set the timer before and during the cooking process.
Function lock and power on
Your oven is fitted with a safety lock so that it cannot be switched on or any settings changed
accidentally.
A long press for 3 seconds activates the lock. A further long press of 3 seconds unlocks the
oven again.
You can activate and deactivate the locking function when the oven is in operation or not.
You can activate and deactivate the
seconds.
When the lock is activated, a will appear in the
DEMO - Demonstration mode
(Special function for exhibitions) When the demonstration mode is activated, the switch-
off and switch-on are still active but the heating elements do not work.
1. From standby mode Press and hold down the power symbol until the demo mode is activated.
The following will appear on the display:
2. Slide the slider to switch from off mode to on mode. The display will show the following:
3. After 3 seconds the configuration is activated. The display shows the following:
NOTE: You can press the Cancel button to exit the setting, or wait 3 seconds to
automatically exit the demo mode setting state and return to the standby state.
. When the time comes, the oven
again and the adjustment is complete.
locking function by long pressing the symbol for 3
status bar.
34
EN
PHP-864