Pando PHB-861 Manuel D'utilisation page 225

INOXPAN S.L. Pando
CAUTION !
If you open the oven door during an operation in progress, the operation
will stop. ¡Be especially careful, you RISK BURNING!
NOTES:
1. For defrosting large portions of food, it is possible to remove the side racks and place the
container on the floor of the cavity.
2. In order to heat dishes, it is advisable to remove the side racks, and the heating modes
"Roasting with hot air" and "Heating with fan" with temperature setting lower than 50 °C
are useful. If the dishes cover more than half of the cavity floor, "Hot air grilling" should be
used.
3. In order to ensure that the heat distribution in the cavity is as even as possible during
"Heating with fan", the fan will operate at certain times during the heating process to
ensure the best possible performance.
Cooling fan
The cooling fan is switched on and off as required. Warm air is blown out above the door.
CAUTION!
Do not cover the ventilation slots. Otherwise, the oven may overheat.
In order for the oven to cool down more quickly, the cooling fan may continue to run for a
few minutes after use.
USE OF THE OVEN - PHTV-862
Cooking with the oven
1. After switching on the oven electrically, touch the oven function symbol to select the
functions, use the slider or the "+/-" symbol to set the cooking temperature.
2. Touch the symbol
the timer after 5 minutes.
3. During the cooking process, you can touch
NOTE: After setting the temperature, you can touch the clock symbol to set the cooking time;
you can adjust it using the slider or the "+/-" symbol.
and the oven will start to operate, otherwise the oven will return to
25
to cancel it.
EN
PHTV-862