Publicité
Les langues disponibles
Les langues disponibles
INOXPAN S.L. Pando
Rapid preheating
You can use fast preheating to shorten the preheating time of a function.
When you select a function, touch the quick warm-up symbol
mark on the display will light up.
NOTE: If this function cannot preheat quickly, a beep will sound.
Temperature probe
Your oven is equipped with a probe to measure the temperature of food. When you insert the
meat probe into position, the icon will light up
change to show the temperature setting of the meat probe, you can use + and - , also the slider
button to change the setting. Then press the function
same way and switch on the oven by pressing
is well prepared). In this mode, the icon is used to change the temperature of the meat probe.
And you can change the setting also during the cooking process.
NOTES:
1. When using the meat probe, insert the probe head into the food rather than elsewhere.
2. Only use the meat probe in this oven.
Function lock and power on
Your oven is fitted with a safety lock so that it cannot be switched on or any settings changed
accidentally.
A long press for 3 seconds activates the lock. A further long press of 3 seconds unlocks the
oven again.
You can activate and deactivate the lock when the oven is running or not. By pressing and
holding down the
When the childproof lock is activated, a will appear
symbol for 3 seconds, you can activate and deactivate the
. At the same time, the display area will
, set the temperature in the
(Before you start, make sure that everything
-
-
PHTV 862
in the status bar.
26
PHTV-862
PHP - 864
, and the quick warm-up
EN
Publicité
