INOXPAN S.L. Pando
INSTALLATION IN FURNITURE
To use this oven safely, ensure that it has been professionally installed in accordance with the
installation instructions. Damage caused by improper installation is not covered by the
warranty.
During installation, wear protective gloves to avoid cutting yourself on sharp edges.
Check the oven for damage before installation and do not connect it if it is damaged. Before
switching on the oven, remove all packaging material and adhesive film from the oven.
It is necessary to have the socket accessible or to incorporate a switch in the fixed wiring, so
that the oven can be disconnected from the mains after installation when necessary.
Caution: The oven must not be installed behind a decorative door in order to avoid
overheating.
ELECTRICAL INSTALLATION EXCLUSIVELY FOR THE QUALIFIED INSTALLER OR SAT PANDO PAGE 52.
13
EN
PHB-861
PHTV-862
PHP-864