Publicité
Les langues disponibles
Les langues disponibles
INOXPAN S.L. Pando
Assembly of the oven door
Reassemble the oven door in the reverse order of disassembly.
1. When fitting the oven door, ensure that both hinges are positioned squarely in
installation holes in the front panel of the cavity.
2. Make sure that the hinges are inserted in the correct position. You should be able to insert
them easily and without resistance. If you feel any resistance, check that the hinges are
correctly inserted into the holes.
3. Open the oven door fully. While opening the oven door, you can recheck whether the hinges
are in the correct position. If they are positioned incorrectly, you will not be able to open the
oven door fully. Re-lock both locking levers.
4. Close the oven door. At the same time, we strongly recommend that you check once again
whether the door is in the correct position and whether the ventilation slots are not badly
sealed.
46
EN
PHB-861
PHTV-862
PHP-864
the
Publicité
