Navigation Menu
This menu is located at the bottom of the display. It utilizes the on-board navigation
buttons or an external mouse to access the menu options. The menu is specific to the test
type selected.
Time and Date
The date and time are displayed in the bottom right corner of the screen. Using the
Configuration Application, the Time can be configured in a 12- or 24-hour format and the
Date can be configured in any order (dd/mm/yyyy, etc.). It is also possible to update the
date and time in the configuration screen of the instrument. Use the navigation buttons
and the attenuator dials to set the appropriate time and date. The date and time will be
updated when a new session is started.
NOTE: The time does not change automatically for daylight savings time. The operator
must manually change the time using the configure button on the front panel of the
instrument or the configuration application.
Common Icons
These icons are found in the test information area and common to the different test types.
Talk Forward – When pressed, a head with a headset icon will appear. This icon will
remain active if the talk forward button is depressed.
Store – When either of the store buttons is pressed, a floppy disc icon flashes and the
result is then displayed.
Interlock – When interlock is active, a padlock icon will appear.
Tracking – When tracking is selected, a railroad track icon will appear.
Aux Intercom – When pressed, the Aux intercom icon indicates direct
communication between the operator and the Aux headset.
Data Transfer – When there is an active connection between the AudioStar Pro
and an external computer, communication will be indicated by the blue arrows.
and VRA-C icons will appear on the display when the front panel buttons have been
pressed to activate the VRA system.
D-0131088 Rev C, 2022-07
GSI AudioStar Pro Instructions for Use
Left, Center and Right VRA – A VRA system with a right, left and
centering toy can be connected to the AudioStar Pro. The VRA-L, VRA-R
Page 27 of 84