Technical Specifications - Tractel Davitrac Traduction De La Notice Originale

davitrac jib crane:
Position
P 1: 700 mm
P 2: 550 mm
P 3: 400 mm
Self-stabilising base
Position
A1
A2
Davitrac
Self-stabilising base
Floor-standing base
Surface-mounted base
Offset wall base
Built-in floor base
IMPORTANT:
The davitrac jib crane may be used as a fall protection anchor device (EN 795: 2012) and may be fitted with
• fall arrest systems in accordance with EN 363:2002,
• rescue lifting devices in accordance with EN 1496:2017 type A or B,
• rope-suspended working devices in accordance with Directive 2001/45/EC.
In such a configuration, it may not be used simultaneously as an anchor point for lifting equipment.
OR
The davitrac jib crane may be used as a lifting anchor point in accordance with Directive 2006/42/EC; in such a
configuration, only one operator can connect to one of the anchor points on the articulation plate (ref. I2, fig 2)

Technical specifications

Table 1 - Dimensions (fig. 1)
Table 2 - davitrac compositions with bases
Headroom H
1640 mm
1520 mm
1400 mm
Width
1680 mm
1404 mm
286819
210098
210108
210118
210128
210138
GB
7