Safety Instructions - StarLab ErgoOne E Mode D'emploi

SAFET Y INS TRUC TIONS
This instrument may sometimes be used with hazardous materials, operations, and equipment.
It is beyond the scope of this manual to address all of the potential safety problems associated with
its use in such applications. It is the responsibility of the user of this pipette to consult and establish
appropriate safety and health practices and determine the applicability of regulatory limitations prior
to use.
!
Please read the following carefully!
1. Every user must read and understand this
operating manual prior to using the instru-
ment and observe these instructions during
use.
2. Follow general instructions for hazard
prevention and safety instructions; e.g.,
wear protective clothing, eye protection and
gloves.
When working with infectious or other haz-
ardous samples, all appropriate regulations
and precautions must be followed.
3. Observe all specifications provided by re-
agent manufacturers.
4. Never use the instrument in an atmosphere
with a danger of explosion. Highly flammable
liquids must not be pipetted.
5. Only use the instrument for pipetting liquids
that conform to the specifications defined in
the operating exclusions and limitations
(see page 5). If in doubt, contact the manu-
facturer or supplier.
6. Always use the instrument in such a way that
neither the user nor any other person is
endangered. Avoid splashes and only use
suitable vessel.
7. Avoid touching the tip orifices when working
with hazardous samples.
WARNING!
Improper use of the instrument or the batteries (short circuit, mechanical damage, overheating,
incorrect AC adapter, etc.) can lead to battery explosion.
4 · ErgoOne E-8/-12 · User Manual
8. Never use force on the instrument!
9. Only use original spare parts. Do not attempt
to make any technical alterations. Do not
dismantle the instrument any further than is
described in the operating manual!
10. Before use check the instrument for visible
damages. If there is a sign of a potential
malfunction (e.g., piston difficult to move,
leakage), immediately stop pipetting.
Consult the 'Troubleshooting' section of
this manual (see page 34), and contact the
manufacturer if needed.
11. The original battery must not be replaced
with non rechargeable batteries or recharge-
able batteries of other manufacturers.
12. To charge the NiMH battery pack, use only
the original AC adapter.
13. The AC adapter has to be protected against
moisture and must be used only for this
instrument.
14. Dispose of batteries only when discharged
and according to applicable regulations.