StarLab ErgoOne E Mode D'emploi page 15

PIPMIX MODE
What to do
Discharge liquid
6.
in the PIPmix
mode
End pipetting
7.
NOTE:
The display shows a maximum of 19 cycles.
How to do it
Press and hold the pipet-
ting key and the liquid is
alternately aspirated and
discharged. The display
shows the up arrow for
aspiration and the down
arrow for discharging and
the number of cycles.
Press the pipetting key
once and the liquid is dis-
charged and the blow-out
function initiated.
After the discharge of the
residual liquid (blow-out),
the display moves back to
the start position.
Keys to press Display readout
press and hold
ErgoOne E-8/-12 · User Manual · 15