StarLab ErgoOne E Mode D'emploi page 17

RE VPIP MODE
What to do
Repeat aspiration
7.
of liquid in revPIP
mode
Initiate blow-out
8.
End pipetting
9.
How to do it
Press the pipetting key
again and the set volume
is aspirated into the tips.
Press the pipetting key
again and the volume is
discharged again, and so
on...
Press the ENTER key after
the last pipetting operation.
The display shows 'blo' for
blow-out.
Press the pipetting key
once to initiate the blow-
out process. The residual
liquid is discharged.
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
Keys to press Display readout
1x
1x
1x
ErgoOne E-8/-12 · User Manual · 17