Revpip Mode - StarLab ErgoOne E Mode D'emploi

RE VPIP MODE THE PROGR AMS · SET TINGS AND USE
Program for pipetting of liquids with high viscosity, vapor pressure or that tend to foam.
Volume and speed adjustments are described on pages 8 and 9.
What to do
Bring up the menu
1.
Select revPIP
2.
mode
Confirm revPIP
3.
mode
Prepare for
4.
pipetting
Aspirate liquid
5.
Discharge liquid
6.
in the revPIP
mode
16 · ErgoOne E-8/-12 · User Manual
How to do it
Press the MENU key three
times to bring up the mode
selection menu.
'Mode' blinks.
Scroll through the modes
using either the UP or
DOWN key until 'revPIP'
appears.
'Mode' continues to blink.
Press the ENTER key.
The Display now shows
'blo' for blow-out.
Press the pipetting key
once to move the pistons
into the start position.
The arrow in the display
points upwards (aspira-
tion).
Press the pipetting key
once. The volume aspirated
will be slightly more than
set.
To discharge the measured
amount of liquid, press the
pipetting key once. The
arrow in the display points
downwards (discharge).
Some liquid will remain
in the tips.
Keys to press Display readout
3x
1x
1x
1x
1x