StarLab ErgoOne E Mode D'emploi page 21

DISP MODE
What to do
Set the number
7.
of steps
Confirm the
8.
number of steps
Aspirate
9.
liquid
Dispense
10.
liquid
Initiate blow-out
11.
End dispensing
12.
How to do it
Press the UP or DOWN key
to set the number of steps.
'Steps' continues to blink.
Press the ENTER key.
The display now shows the
number of steps that has
been set.
Press the pipetting key
once to aspirate the liquid.
Each time the pipetting key
is pressed one dispens-
ing step is performed. The
arrow in the display points
downwards (discharge).
The display shows the
number of dispensing steps
left.
Press the ENTER key after
the last dispensing step.
The display shows 'blo' for
blow-out. Press the pipet-
ting key once to initiate the
blow-out process (see also
p. 19).
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
Keys to press Display readout
+
–
1x
1x
1x
1x
ErgoOne E-8/-12 · User Manual · 21