1
Safety precautions
The following symbol means:
Caution! Make sure you have fully read and understood the present manual before
using the equipment. Please pay special attention to sections marked by this symbol.
1.1 General safety
›
Save the unit from shocks or falling.
›
Store and transport the unit in a horizontal position (see package label).
›
After transportation or storage, keep the unit at room temperature for 2-3 hrs before
connecting it to the mains.
›
Before using any cleaning or decontamination methods except those recommended by the
manufacturer, check with the manufacturer that the proposed method will not damage the
equipment.
›
Do not make modifications to the unit.
1.2 Electrical safety
›
Connect only to external power supply with voltage corresponding to that on the serial
number label.
›
Use only the external power supply provided with this product.
›
Ensure that the external power supply is easily accessible during use.
›
Disconnect the unit from the mains before moving.
›
Turn off the unit by disconnecting the external power supply from the power socket.
›
If liquid penetrates into the unit, disconnect it from the external power supply and have it
checked by a repair and maintenance technician.
›
Do not operate the unit in premises where condensation can form. Operating conditions of
the unit are defined in the Specifications section.
1.3 During operation
›
Do not operate the unit in environments with aggressive or explosive chemical mixtures.
Please contact manufacturer for possible operation of the unit in specific atmospheres.
›
Do not operate the unit if it is faulty or has been installed incorrectly.
›
Do not use outside laboratory rooms.
›
Do not place a load exceeding the maximum load value mentioned in the Specifications
section of this Manual.
1.4 Biological safety
›
It is the user's responsibility to carry out appropriate decontamination if hazardous material is
spilt on or penetrates into the equipment.
4
· Rotator Mixer RM Multi-1 · Manual