Publicité
Les langues disponibles
Les langues disponibles
UNPACKING AND INSPECTION
Transportation and Storage
Risk of damage to drive or other equipment.
•
Do not stack drive boxes more than three high (Frame 2) or two high (Frame 3) when palleting for
storage.
•
Do not place heavy items on drive.
•
Do not drop drive or subject it to hard impact.
•
Dispose of drive properly as industrial equipment waste.
The drive should be stored in the shipping carton or crate before installation.
Unpacking
Risk of personal injury or damage to drive or other equipment.
•
Use two persons when lifting the drive for transport or installation. If using lifting equipment, it must
be in good condition and rated for at least 5 times the weight of the drive.
Refer to
"Applications" on page 8
1.
Inspect exterior of package for shipping damage. If there is damage, notify the shipping agent and your
sales representative.
2. Make sure the part number and product ratings on the identification label are correct for the applica-
tion.
3. Remove drive from the box and check for damage.
4. Make sure the product ratings on the nameplate match the package label.
What's in the Box
1.
Variable Frequency Drive (VFD)
2. Pressure Transducer
3. Transducer Cable
4. Screwdriver/Adjustment Tool
5. Strain Relief Fitting
6. Owner's Manual
for drive weight.
2
4
5
UNPACKING AND INSPECTION
Transportation and Storage
1
3
6
9
Publicité
