Publicité
Les langues disponibles
Les langues disponibles
COMMUNICATIONS
FE Connect Mobile Application
The SubDrive Connect Plus companion app is an intuitive way to wirelessly configure and control your VFD.
It provides features such as:
•
Simple, application-based setup for quick and easy startup
•
Create templates for fast configuration of multiple drives
•
MultiDrive set up and control
•
Informational dashboard for visual monitoring of system performance
•
Mobile control mode for easy Hand mode operation
•
In-app troubleshooting with fault time and date logging
•
Email system logs directly to FE support
•
Wireless drive firmware updates right from your phone
In your mobile device's app store, search for FE Connect. In the search results, locate the FE Connect Sub-
Drive Connect + app and install it. Once installed, the app icon is named SubDrive Plus. The SubDrive Plus
app provides live monitoring of system performance, advanced troubleshooting, fault log monitoring, and
advanced configuration of the SubDrive Connect Plus drive.
Setup Bluetooth Connection
After installing the SubDrive Plus app on your mobile device, use the following procedure to connect to the
drive:
1.
From the Home screen, tap "Connect New Product."
2. On the New Product Wizard screen, tap either Scan QR Code or Enter the Bluetooth Key.
3. If using the scanning tool, center the QR code on the drive in the screen. The code is displayed on the
VFD display and on a sticker to the right of the display. Refer to
4. If using the Bluetooth key, (also available onscreen) enter it in the box provided.
5. Enter a Name and Location to identify the drive within the app.
6. Tap Finish & Connect to complete the connection.
FE Connect Mobile Application
"Menu Navigation" on page
COMMUNICATIONS
25.
31
Publicité
