Franklin Electric SUBDRIVE CONNECT PLUS SDCP-SUB0723 Manuel Du Propriétaire page 48

SPECIFICATIONS
Programming Defaults
Programming Defaults
Default
Parameter
Value
Submersible
(w/dV/dt filter)
Motor Type
Centrifugal
(w/o filter)
Motor Current
1.0A
Sensor Type Transducer
Sensor Range 200 PSI
Pressure
0 PSI
Setpoint 1
Pressure
0 PSI
Setpoint 2
Keypad
60 Hz
Frequency
Drawdown 5 PSI
High
Frequency
60 Hz
Limit
Submersible: 30
Low Fre-
Hz
quency Limit
Surface: 15 Hz
Submersible: 2.5
Carrier kHz
Frequency Surface:
2.5 kHz
48
Units Range
DIP
Switch
• Submersible
N/A No
• Centrifugal
• By Frame
Size and
Amps No
• Number of
input phases
• Transducer
N/A • Pressure No
Sensor
PSI • 100 to 300 No
• 5 to (Sensor
PSI No
Range – 5)
• 5 to (Sensor
PSI No
Range – 5)
• Low
Frequency
Hz Limit to High No
Frequency
Limit
• 5 to 20 (or
pressure
PSI setpoint No
whichever is
less)
• (Low
Frequency
Hz No
Limit + 1) to
60
• Default to
(High
Hz No
Frequency
Limit - 1)
• 2.5kHz -
Submersible
kHz • 2.5kHz or Yes
8kHz -
Surface
Set Parameter via:
Change
FE
while
Progra
Connect
Running
mming
App
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
No Yes
No Yes
Description
Sets the motor type as submersible
No
or centrifugal (surface)
Set to match motor nameplate cur-
No
rent
Transducer or Pressure (Hobbs)
Yes
Switch
Sets the range for the installed pres-
sure transducer.
Yes
This parameter is hidden for Pressure
Switch sensor type.
Sets the pressure setpoint that the
system will maintain.
Yes
This parameter is hidden for Pressure
Switch sensor type.
Sets the secondary pressure setpoint
that the system will maintain.
Yes
This parameter is hidden for Pressure
Switch sensor type.
Sets the constant speed at which the
Yes
motor will run.
Sets the pressure drop required for
Yes the system to exit sleep and run the
motor and pump
Sets the highest frequency that the
Yes
motor can run
Sets the lowest frequency that the
Yes
motor can run
Adjusts the carrier frequency when
running a surface motor. Can not be
Yes
adjusted if in Submersible Mode or
on a Submersible (filtered) model.