Burkert 8400 Manuel D'utilisation page 7

Basic safety information
3. BASIC SAFETY INFORMATION
This safety information does not take into account:
• any contingencies or occurences that may arise during assembly,
use and maintenance of the devices.
• the local safety regulations that the operator must ensure the staff
in charge of installation and maintenance observe.
Danger due to high pressure in the installation.
Danger due to electrical voltage.
Danger due to high temperatures of the fluid.
Danger due to the nature of the fluid.
Various dangerous situations
To avoid injury take care to:
▶ prevent any power supply switch-on.
▶ carry out installation and maintenance by qualified and
skilled staff with the appropriate tools.
▶ guarantee a set or controlled restarting of the process, after
a power supply interruption.
Type 8400
Various dangerous situations
To avoid injury take care to:
▶ use the device only if in perfect working order and in compli-
ance with the instructions provided in the user manual.
▶ observe the general technical rules during the planning and
use of the device.
NOTE
Chemical compatibility of materials in contact with the fluid.
▶ Systematically check the chemical compatibility of the
component materials of the transmitter and the sensor and
the products likely to come into contact with it (for example:
alcohols, strong or concentrated acids, aldehydes, alkaline
compounds, esters, aliphatic compounds, ketones, halogen-
ated aromatics or hydrocarbons, oxidants and chlorinated
agents).
english
7