Burkert 8400 Manuel D'utilisation page 28

Screen
Screen A
Screen B
Screen C
Screen D (only for transmitters)
9.7. Calibration Mode
All settings may influence the correct running of the process.
→ Note the values of the parameters set in the table in chapter 9.7.3.
28
Displays...
...the temperature measured.
When the unit flashes, the min. and max. values permitted have been
exceeded.
...the value of the high commutation threshold (
...the value of the low commutation threshold (
...the value of the 4...20 mA output.
english
Type 8400
Adjustment and functionalities
O HI ).
).
O LO