Burkert 8400 Manuel D'utilisation page 37

Maintenance and troubleshooting
10. MAINTENANCE AND
TROUBLESHOOTING
10.1. Safety instructions
DANGER
Risk of injury due to high pressure in the installation
▶ Stop the circulation of fluid and depressurize the pipes
before loosening the process connections.
Risk of injury due to electrical voltage
▶ Before starting work, make sure that you switch off the sup-
ply voltage and secure it to prevent restarting.
▶ Do not unscrew the cover of a powered device.
▶ Observe all applicable accident protection and safety guide-
lines for electrical equipment.
Risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid and drain the pipes before loos-
ening the process connections.
▶ Keep all easily flammable material and fluid away from the
device.
Risk of injury due to the nature of the fluid.
▶ Respect the regulations on accident prevention and safety
relating to the use of aggressive fluids.
Type 8400
WARNING
Risk of injury due to non-conforming maintenance.
▶ Maintenance must only be carried out by qualified and
skilled staff with the appropriate tools.
▶ Ensure that the restart of the installation is controlled after
any interventions.
10.2. Maintenance and cleaning
NOTE
The device may be damaged by the cleaning product.
▶ Clean the device with a cloth slightly dampened with water
or a product compatible with the materials from which it is
made.
Please feel free to contact your Bürkert supplier for any addi-
tional information.
english
37