Basic Safety Instructions - Burkert 8022 Mode D'emploi

Type 8022
BasicSafetyInstructions
3.

Basic saFeTy insTrucTiOns

These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation, operation and maintenance of the devices.
• local safety regulations – the operator is responsible for observing these regulations, also with reference to the
installation personnel.
noTE
electrostatic sensitive components/modules!
The device contains electronic components, which react sensitively to electrostatic discharge (ESD). Contact
with electrostatically charged persons or objects is hazardous to these components. In the worst case scenario,
they will be destroyed immediately or will fail after start-up.
• Observe the requirements in accordance with EN 61340-5-1 and 5-2 to minimize/avoid the possibility of
damage caused by a sudden electrostatic discharge!
• Also, ensure that you do not touch electronic components when the power supply voltage is present!
The flow transmitter or pulse divider Type 8022 was developed with due consideration given to accepted
safety rules and is state-of-the-art. Nevertheless, dangerous situations may occur.
Failure to observe this operating manual and its operating instructions as well as unauthorized tampering
with the device release us from any liability and also invalidate the warranty covering the devices and
accessories!
English
5