Basicsafetyinformation
3.
bAsic sAFeTy inFoRmATion
This safety information does not take into account:
•
any contingencies or occurences that may arise during assembly,
use and maintenance of the devices.
•
the local safety regulations that the operator must ensure the staff
in charge of assembly observe.
danger due to high pressure
•
Cut off the pressure and depressurize the pipes before loosening
the pipes and fittings.
danger due to high temperatures of the fluid
•
Use safety gloves to handle the device
•
Stop the circulation of fluid and purge the pipe before loosening
the pipes and connections.
•
Keep all easily flammable fabrics and fluids away from the device.
Do not insulate the device.
danger due to electrical voltage
•
Before starting work, make sure that you switch off the supply
voltage and secure it to prevent restarting.
•
Observe all applicable accident protection and safety guidelines
for electrical equipment.
Type 8081
Various dangerous situations
To avoid injury take care to:
•
prevent any power supply switch on.
•
carry out the installation and maintenance work by qualified and
skilled staff with the appropriate tools.
•
guarantee a set or controlled restarting of the process, after a
power supply interruption.
•
use the device only if in perfect working order and in compliance
with the instructions provided in the user manual
•
observe the general technical rules during the planning and use
of the device.
notice
elements / components sensitive to electrostatic discharges
•
This device contains electronic components sensitive to electro-
static discharges. They can get damaged if they are touched by
an electrostatically charged person or object. In the worst case
scenario, these components are instantly destroyed or go out of
order as soon as they are activated.
•
To minimise or even avoid all damage due to an electrostatic dis-
charge, take all the precautions described in the EN 100 015-1
norm.
•
Also ensure that you do not touch any of the live electrical com-
ponents.
english
7