Basic Adjustment - Burkert 8185 Mise En Service

Reset
Optional settings
LEVEL TRANSMITTER 8185 - 4 ... 20 mA/HART
Set up with the indicating and adjustment module
Copy sensor data?

Basic adjustment

If the function "Reset" is carried out, the sensor resets all
settings to default.
The following values will be reset:
Function
Min. adjustment
Min. adjustment - Rod/Coax version
Min. adjustment - Cable version
Integration time ti
Linearization
Sensor-TAG
Display
Current output - characteristics
Current output - max. current
Current output - min. current
Current output - failure
Application - rod/coax version
Application - Cable version
All special parameters are reset to delivery status.
Pointer
The min. and max. values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g.
scaling, simulation or trend curve presentation are shown in
the following menu schematic. You will find a detailed
description of these menu items in the operating instructions
manual "Indicating and adjustment module".
Reset value
Distance, upper dead zone
Distance, supplied sensor length
Distance, lower dead zone
0 s
linear
Sensor
Distance
4 ... 20 mA
20 mA
4 mA
<3.6 mA
Liquid
Solid
25