Burkert 8400 Manuel D'utilisation page 22

8. COMMISSIONING
8.1. Safety instructions
WARNING
Danger due to nonconforming commissioning.
Nonconforming commissioning could lead to injuries and
damage the device and its surroundings.
▶ Before commissioning, make sure that the staff in charge
have read and fully understood the contents of the manual.
▶ In particular, observe the safety recommendations and
intended use.
▶ The device/installation must only be commissioned by suit-
ably trained staff.
22
english
Type 8400
Commissioning
NOTE
Risk of damage to the device due to the environment
• Protect this device against electromagnetic interference,
ultraviolet rays and, when installed outdoors, the effects of
the climatic conditions.
• When the device is switched on and the cover is
open, protection against electric shock is no longer
guaranteed.
• Check the chemical compatibility between the fluid to
be measured and the materials from which the device
is made exposed to it.
When switching on transmitters only, the display briefly
shows " " when the device's main board and the
BUS RUN
expansion board are synchronised.