Publicité
INSTRUCTIONS FOR USE
NOTE: The cervical traction bar is an optional accessory that is supplied to help with the
angle of pull for the cervical traction. If used, install the bar at the applicable location on
the H-bracket.
7.
After use of the traction weight, remove the weight and the rope from the assembly.
8.
Press the Cervical Traction Release button, and then push the assembly into the
column so that it is in the locked-in position.
3.2.15
Shut Down the Allen Advance Table
1.
Level the Allen Advance Table and the support top "Level the Allen Advance Table
and the Support Top" on page 42.
2.
Press and hold the lower control until the Allen Advance
Table is in its lowest position.
3.
Hang the pendant and its cord on their holders.
4.
Turn the Allen Advance Table off. This removes all power
from the Allen Advance Table.
5.
Unplug the power cord from the facility power outlet, and
store the power cord on the Allen Advance Table.
NOTE: We recommend that you keep the Allen Advance Table plugged in when it is not
in use so that the batteries will stay charged. Know and follow your facility's protocol.
Document Number: 80028190
Version: E
Page 50
English
Issue Date: 16 MAY 2022
Ref Blank Template: 80025117 Ver. F
Publicité
