Publicité
INSTRUCTIONS FOR USE
7.
Make sure of these, and then follow facility protocols to manually flip the support tops
180°:
• There is a sufficient number of persons available for the patient to be flipped.
• Persons and equipment will not be in the way of the support tops when they
get flipped.
• To watch the lines so that they don't get pinched or caught during the flip.
• The patient's head stays in the correct position during the flip.
8.
Do as follows to unlock the support tops for the flip:
a. Lift the end of the flip handle (A) until it locks in
position.
b. Push and hold the red safety lever (B) forward as you
pull the flip handle (A) down to the released position.
NOTE: The manual flip indicator on the display turns orange to
show that the support tops are no longer locked in position
and they can be flipped. The pendant indicator on the display
turns off to show that you can not use the pendant controls
while the Allen Advance Table is in flip mode.
9.
After the patient has been flipped, and the tops are level
(the tilt level indicator on the display is green), push the flip
handle up to the locked position. You do not need to
press the red safety lever.
Document Number: 80028190
Version: E
Page 46
English
Issue Date: 16 MAY 2022
Ref Blank Template: 80025117 Ver. F
Publicité
