Switches - Paradox MG5050 Manuel D'utilisation

Switches

Configuring switches allows you to link outputs, security options, or macros to buttons in your
home. You can then activate any of these options from the physical buttons in your home as well
as from the BabyWare interface.
A switch module may include buttons, a dial, or both. Buttons can control security events or home
automation outputs. Dials allow you to adjust the degree of an output's action. For example, a dial
can act as a dimmer for lights. Dials can be local (adjusting one output area at a time) or global
(adjusting many output areas at once). Just as with buttons, you can control an output from the
physical dial as well as from the BabyWare interface.
To configure switches
1. If there are not already switches in the Main Window, click the Add Item button. The Items
Selction window appears.
Figure 22 - Items Selection Window (Switches)
2. Expand the Mama Modules section, select the item(s) you want to add and then click Ok. The
new modules appear in the Switches section of the Main Window.
3. In the Main Window, by the switch you want to configure, click Configure. This opens the
Switch programming window.
BabyWare 22 Quick Start