Door Groups And Doors - Paradox MG5050 Manuel D'utilisation

Figure 15 - Zones Window
2. Program the zone and then click Ok.
3. Once you have configured zones you must save your changes by clicking the Save button on
the BabyWare toolbar in the Main Window.

Door Groups and Doors

You can create a new door group and then add doors, or you can add doors to an exisiting door
group. From the Properties window of a door you can program door settings such as lock
schedules and alarm types. You can also specify access information.
To create new door groups
1. Right-click a door group in the Main Window and select Properties. The Door Groups window
appears.
Figure 16 - Door Groups Window
2. Click the Add button to create a new door group, configure the door group, then click Ok. The
door group appears in the Main Window.
3. Save your changes by clicking the Save button on the BabyWare toolbar in the Main Window.
To configure doors
1. Add a door to a door group by right-clicking a door group and selecting Add Door. A new door
appears in the door group.
2. Right-click a door in a door group and select Properties. The Doors window appears.
BabyWare 17 Quick Start