Paradox MG5050 Manuel D'utilisation page 271

Figure 23 - Switch Programming Window
4. In the fields under the Button Name heading, type meaningful names for each of the buttons.
The button names correspond to the buttons in the image of the module as well as the to the
buttons on the physical device.
5. If you want the same button to activate and deactivate the same output, set the Button Action
to ON/OFF. If you want one button to activate the output and another button to deactivate the
output, set the Button Action to ON and the Button Action for the next button will automatically
change to OFF.
6. To program the output activation behavior for the highlighted button, click Add Action in the
Button ON section. Then do one of the following:
• To select and configure outputs for the ON button, click Control Output. The Select
Outputs window appears. This window displays all of the outputs in your system and their
configurable settings. Click the check box beside each output you want the button to
control. Click Ok.
• To configure a button to trigger security functions such as panic, arm/disarm or stay arm,
click Control Alarm System. Select the security function(s) you want the button to
control. Click Ok.
• To configure a button to trigger a macro sequence, click Start/Stop Macro Sequence.
The Select Macro Sequence to Start window appears. Click the check box beside the
macro you want the button to control. Click Ok. For more information about programming
macros, see the section "Macros" on page 25.
• To copy the programming from one button to another, click Copy Button Programming.
<<this does not yet exist>>
7. To program the output deactivation behavior for the highlighted button, click Add Action in the
Button OFF section. Then do one of the following:
• To select and configure outputs for the OFF button, click Control Output. The Select
Outputs window appears. This window displays all of the outputs in your system and their
<<i have not seen this>>
BabyWare 23 Quick Start