Areas And Zones - Paradox MG5050 Manuel D'utilisation

Figure 13 - Keypad Properties
4. Configure the module and then click Ok. You must then save your changes and update the
control panel by clicking the Send button on the BabyWare toolbar in the Main Window.

Areas and Zones

You can divide your security system into multiple areas (partitions). Each area is a separate "mini
system" containing a series of zones. Users are permitted access to their assigned areas only.
From the areas Properties window you can arm and disarm the system, set alarm options, and set
arming schedules.
Your security system may have several zones within an area. A zone is usually defined by a single
detection device. When you open BabyWare, the Main Window displays 8 zones by default. You
can link a zone to an area from the zone Properties window.
To configure areas
1. Right-click the area and select Properties. The Partitions window appears. You can add new
areas by clicking the Add button in the left pane.
BabyWare 15 Quick Start