Figure 7 - System Progress Window
2. Under the Assign-to heading, do one of the following:
•
To add a new device to the system, select New from the drop-down menu.
•
To connect an existing device, select Connect from the drop-down menu.
3. Click Ok. Then you can begin programming the security system.
Step 7: Program the Imperial system
Once you have connected to the control panel, you can open the Main Window of an account to
program security settings or home automation. From this window you can configure the
parameters of areas, zones, doors, users, and schedules. You can also configure switches and
macros to perform functions in your home.
For more detailed information about programming security settings, see the section "Programming
the Security System" on page 12 of this guide.
For more detailed information about programming home automation, see the section
"Programming Home Automation" on page 21.
To open the Main Window of an account
1. Highlight the account you want to open by clicking the account number.
2. From the menu at the top of the window, click Open. The Main Window appears.
Figure 8 - Opening an Account
BabyWare
9
Quick Start