Paradox MG5050 Manuel D'utilisation page 275

Figure 27 - Macro Programming Window
4. In the fields under the Label heading, type meaningful names for each of the macros you want
to create. Select the correct output type for your macro from the drop-down menu under the
Type heading.
5. If you want to configure macros for sprinklers, proceed to the next step. If you want to
configure custom macros, or macros for shutters or lights, do the following:
a. Click Add Output in the Macro ON panel. The Select Outputs window appears. This
window displays all of the outputs in your system and their configurable settings. Click the
check box beside each output you want the macro to control. Be sure that the appropriate
output type appears under the Type heading. Click Ok. The outputs are added to the
Output section under Macro ON and Macro OFF.
b. Click Add Trigger in the Macro ON panel. Select either Add Schedule or Add Event.
Then program the schedule or event that you want to trigger the output. Click Ok. The
triggers are added to the Trigger section under Macro ON and Macro OFF. You can link
triggers together by using the AND/OR options from the drop down menus next to each
trigger.
6. To configure a macro for sprinklers, highlight a sprinkler macro in the left panel. The watering
schedule and options appear in the right panel. If you have already added sprinkler outputs to
the Imperial system, they will appear at the bottom of the right panel. If you have not already
added sprinkler outputs you can add them by clicking the Add Sprinkler button in the right
panel.
BabyWare 27 Quick Start