Programming The Security System; Control Panel And Modules - Paradox MG5050 Manuel D'utilisation

Programming the Security System

Configuring the parameters of your security system with BabyWare is a simple process. You can
configure all of the items in the Main Window by accessing the Properties window of any system
element. This section briefly describes how to modify the settings for the following elements:
•

Control panel and modules

• Areas and zones
• Door groups and doors
• User groups and users
• Schedules
You configure settings by accessing the Properties menu of a system element.
You can add new elements to the security system either from a Properties window, or by clicking
the Add Item button on the BabyWare toolbar. The Add Item button opens the Items Selection
window where you can add modules, doors, areas, zones, users, and schedules to your system.
Figure 10 - Items Selection Window
You can also add zones to areas, doors to door groups, and users to user groups in the Main
Window by using the right-click button. For example, to add a zone to an area, right-click the area
and select Add Zone.
Control Panel and Modules
The procedures in this section describe how to modify the settings for your control panel and the
modules connected to that control panel.
To configure the control panel
1. Right-click the control panel and select Properties. The control panel System Options window
appears. The tabs in this window allow you to program different features of the control panel,
for example, Timings, Reporting Codes, and PGMs.
BabyWare 12 Quick Start