Programming Home Automation; Outputs - Paradox MG5050 Manuel D'utilisation

Programming Home Automation

BabyWare allows you to control the functions of various outputs (such as lights, shutters, and
sprinklers) in your MAMA home automation system. You can activate the functions of these
outputs directly from the BabyWare interface as well as from configurable buttons in your home.
You can also customize the activation and deactivation behavior of your outputs by creating
macros.
This section of the BabyWare Getting Started guide shows you the basics of programming outputs,
switches, and macros.

Outputs

The modules of your MAMA system control the outputs that you configure. To add MAMA
modules, click the Add Item button on the BabyWare toolbar. The Add Item button opens the
Items Selection window. Expand the Mama Modules section, select the items you want to add, and
then click Ok. The new modules appear in the Main Window.
Figure 21 - Items Selection (Mama Modules)
To configure the programming of outputs, do the following:
1. In the BabyWare Main Window, under Mama Modules, expand a MAMA controller module.
2. Right-click one of the outputs under the controller and click Properties. The Relay Controller
Properties window appears.
3. Program the output and then click Ok.
4. Once you have configured outputs you must save your changes by clicking the Save button
on the BabyWare toolbar in the Main Window. The new outputs can now be linked to switches
or macros.
BabyWare 21 Quick Start