Paradox MG5050 Manuel D'utilisation page 163

In all above instances you need to forward the following ports:
Name: IP100.1
IP Address: {IP Address of IP100 Module}
Type: TCP/UDP
Start Port: 10000
End Port: 10000
Name: IP100.2
IP Address: {IP Address of IP100 Module}
Type: TCP/UDP
Start Port: 10001
End Port: 10001
PLEASE NOTE: Also make sure that the IP Address assigned to the IP150 Module is excluded from your DHCP Server
IP Address range. This info can normally be found under your LAN SETUP.
STEP 5
Register IP150 with Paradoxmyhome.com
The last step is to register and validate port forwarding of the IP150 to the DNS paradoxmyhome.com website.
Using the IP Exploring Tool, right click on the IP Address and select REGISTER. Use the email and password you had used
to log into the paradoxmyhome.com website.
When the registration is completed, right click the IP Address and select VALIDATE PORT FORWARDING.
Page 10 of 11