Paradox MG5050 Manuel D'utilisation page 272

configurable settings. Click the check box beside each output you want the button to
control. Click Ok.
• To configure a button to trigger security functions such as panic, arm/disarm or stay arm,
click Control Alarm System. Select the security function(s) you want the button to
control. Click Ok.
• To configure a button to trigger a macro sequence, click Start/Stop Macro Sequence.
The Select Macro Sequence to Start window appears. For more information about
programming macros, see the section "Macros" on page 25.
• To configure a button to stop a macro sequence, click Stop Macro Sequence. The Select
Macro Sequence to Stop window appears. Click the check box beside the macro you want
the button to stop. Click Ok.
• To copy the programming from one button to another, click Copy Button Programming.
<<this does not yet exist>>
8. To program a dial on your switch module, highlight either the local or global dial and click Add
Action in the Button ON section. Then do one of the following:
• To select and configure outputs for Button ON, click Control Output. The Select Outputs
window appears. This window displays all of the outputs in your system and their
configurable settings. Click the check box beside each output you want the button to
control. Click Ok.
• To configure a dial to trigger a macro sequence, click Start/Stop Macro Sequence. The
Select Macro Sequence to Start window appears. Click the check box beside the macro
you want the dial to control. Click Ok. For more information about programming macros,
see the section "Macros" on page 25.
• To configure a dial to stop a macro sequence, click Stop Macro Sequence. The Select
Macro Sequence to Stop window appears. Click the check box beside the macro you want
the dial to stop. Click Ok.
• To copy the programming from one button to another, click Copy Button Programming.
<<this does not yet exist>>
The switches you configure appear in the Main Window with icons and sliders in the manual
controls and status column. At any time, you can activate a switch function from this column. You
can also activate switch functions from the image of the switch module in its programming window.
Switch Labels
To create a name for the label of a switch, right-click the controller in the Switch section of the Main
Window and then click Rename. Type a meaningful name for the switch and then click Ok.
You can slide labels into the illuminated label window on the switch module. To print lables, right-
click the controller and then click Print Labels. The Print Switch Label Selection window appears.
From this window you can select the label you want to print as well as the font and size of its text.
<<i have not seen this>>
BabyWare 24 Quick Start