Paradox MG5050 Manuel D'utilisation page 159

STEP 4
ROUTER setup

Now that we have setup the IP150 , we need to setup the router

What we mean by this is that we need to setup port forwarding.

This is like opening a pathway for the data to travel.

In order to do this , we need to log into the Router

We do this as follows – We type in the address of the router into our browser

The address is normally 192.168.1.1 or 10.0.0.2

If the address is correct the following screen should appear.


The USER and PASSWORD must be entered to login.

Defaults are admin admin ; admin:....... ; admin: password

After successful login the main screen will be viewed

Each Router brand has its own software and locations are named differently.

Below are the default software setups for the 3 most common Routers.

Netgear , Billion , Telkom 5102G
NETGEAR Routers
The Net gear port forwarding is located under – SERVICES or PORT FORWARDING / PORT TIGGERING
In this section select - ADD CUSTOM SERVICE

As per the image below
Page 6 of 11