Preparing For Treatment - Boston Scientific Swiss LithoClast Select System Mode D'emploi

PREPARING FOR TREATMENT

Clean, disinfect and sterilize all the components before first
use and after as described in the "Reprocessing Instructions" manual.
Assemble the application parts under sterile conditions.
Before first cleaning, disinfection and sterilization, connect
the supplied silicone tubing for the air supply to the connector of the
Pneumatic Handpiece. Handpiece damage will occur if moisture enters
the handpiece interior.
Before treatment, perform a function test according to the instructions
given in the respective paragraph.
Sterilized backup probes should be available in case of a probe
failure during treatment. Should a probe break distally, sterile grasping
forceps should be used to remove probe pieces from the urinary tract.
A wide range of Pneumatic Probes are available to cover
lithotripsy applications. Please contact your BSC representative.
2
FB-412_US ed 2008-04 User man pn3 BSC.indd 2 6/3/2015 2:35:28 PM