Customer Service; Troubleshooting; Technical Data - Boston Scientific Swiss LithoClast Select System Mode D'emploi

CUSTOMER SERVICE

Please contact your BSC representative for any servicing or repairs.
Boston Scientific and EMS decline responsibility for the safety of the
device and declare the warranty null and void if service or repair is
carried out by an unauthorized third party or if non-genuine spare
parts are used.
It is best to ship your product in the original packaging. It protects your
product against damage during shipment.
Before dispatching your product including all accessories,
please clean, disinfect and sterilize as described in the operating
instructions.
Risk of transmitting micro-organisms! To protect the personnel of
the repair center and for safety reasons during transport and shipment, all
products and accessories returned to the factory for repair or revision must
be cleaned, disinfected and sterilized in accordance with the instructions
manual. Repair can be refused for product or accessories received in a
contaminated condition.

TROUBLESHOOTING

For all error codes displayed on the unit, please read the
instruction manual of the unit.
20
FB-412_US ed 2008-04 User man pn3 BSC.indd 20

TECHNICAL DATA

DESCRIPTION
Distributor Boston Scientific Corporation
Marlborough, MA USA 01752
Manufacturer EMS SA, CH-1260 Nyon, Switzerland
Models Swiss LithoClast
Handpiece pn3
Classification EN-60601-1 Class I
Applied part BF
IP67
Mode: Continuous operation
Classification MDD 93/42 Class IIb
EEC
Weight 150 g (5.3 oz)
Dimensions Length: 169 mm (6.7 in)
Width: 36 mm (1.4 in)
Operating conditions +10°C to +40°C (50°F to 104°F)
30% to 75% relative humidity
Validated life time > 500 sterilization cycles
> 1.000.000 pulses
Storage and transport –10°C to +40°C (14°F to 104°F)
conditions
10% to 95% relative humidity
500 hPa to 1060 hPa air pressure
(7.2 psi to 15.3 psi)
Pneumatic
®
6/3/2015 2:35:32 PM