Instructions For The Company; Instructions For Installation, Maintenance And Operating Personnel; Requirements For The Installation Location - probst SH-2500-UNI-B Instructions D'emploi

Operating Instructions
SH 2500-UNI-B
3.3

Instructions for the Company

The lifting devices are manufactured according to current technical standards and are safe. However, they will
present hazards
●
if they are not operated by qualified or, at the least, trained staff,
●
if they are used contrary to the approved applications.
Problems can arise
●
for the health and life of operators and other persons,
●
for the lifting device and other valuable goods.
3.4

Instructions for Installation, Maintenance and Operating Personnel

The device must be installed and maintained by qualified personnel, mechanics and electricians.
Each person in your company involved in the installation, start-up, operation, maintenance, and repair of the
device must have read and understood the operating instructions and especially the chapter "Safety" therein.
Your company must ensure by internal measures
●
that the operators of the lifting device are properly trained,
●
that they have read and understood the operating instructions,
●
that the operating instructions will be available to them at any time.
The responsibilities for the tasks carried out with the device must be clearly organized and observed. There
must be no ambiguity regarding responsibilities.
3.5

Requirements for the Installation Location

●
The lifting vacuum lifting device may not be used in explosion-risk rooms or areas.
●
The ambient temperaturemust be between 3° and 40 °C (if this temperature is exceeded, please consult
the manufacturer before using the device).
●
The vacuum lifting device must be connected to the electrical supply and the main switch of the crane
from which it is suspended.
Ensure, by means of internal instructions and regular inspections, that the area around the workplace is
kept clean and tidy at all times.
9 / 32
Safety
V7 GB