Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
5.3
Gripping ranges
1
2
3
4
Adjustment of the gripping area through the
positions of the adjustable holes (symmetrical):
Pos.1
+ Pos.1
(right)
(left)
Pos.2
+ Pos.2
(right)
(left)
Pos.3
+ Pos.3
(right)
(left)
Pos.4
+ Pos.4
(right)
(left)
Pos.5
+ Pos.5
(right)
(left)
Pos.6
+ Pos.6
(right)
(left)
Pos.7
+ Pos.7
(right)
(left)
Pos.8
+ Pos.8
(right)
(left)
Pos.9
+ Pos.9
(right)
(left)
6
Operation
6.1
Operating for devices with automatic release
•
The device is connected to the lifting equipment/carrier (e.g. excavator).
•
Before lifting the device, the gripping range has to be adjusted.
•
The device is placed over the product, set down, the device closes round the product and it can be lifted.
•
Set down on the ground again, the device opens automatically, the automatic release locks it into
position so that the device can be lifted without closing up.
•
Placed over the next product, the automatic release disengages itself and the product can be lifted.
The device therefore is a ONE-MAN-MACHINE.
Shut-down the device without lifting equipment/carrier only on even ground. The gripping arms must be
opened enough, to ensure a secure standing of the device. Otherwise there is a danger of overturning!
5310.0256
5
6
7
8
9
9
8
7
6
Possible gripping areas for gripping goods
(product dimension):
from
~ 0
to
from
~ 80
to
from
~ 160
to
from
~ 270
to
from
~ 350
to
from
~ 430
to
from
~ 500
to
from
~ 570
to
from
~ 640
to
V8
5
4
3
2
~ 80
mm
~ 160
mm
~ 270
mm
~ 350
mm
~ 430
mm
~ 500
mm
~ 570
mm
~ 640
mm
~ 730
mm
14 / 18
1
GB
Publicité
Chapitres
Table des Matières
Dépannage
