Drain Plug - probst SH-2500-UNI-B Instructions D'emploi

1. Oil change
Drain the oil while the engine is still warm to assure rapid and
complete draining.
1. Remove the oil filler cap and drain plug to drain the oil.
2. Install the drain plug, and tighten it securely.
3. Refill with the recommended oil (see page
level.
4. Install the oil filler cap.
ENGINE OIL CAPACITY:
1/2 REDUCTION GEAR OIL CAPACITY:
0.50 (0.53 US qt , 0.44 Imp qt)
1/6 REDUCTION GEAR OIL CAPACITY:
0.15 (0.16 US qt , 0.13 Imp qt)

DRAIN PLUG

Used motor oil may cause skin cancer if repeatedly left in contact
with the skin for prolonged periods. Although this is unlikely
unless you handle used oil on a daily basis, it is still advisable to
thoroughly wash your hands with soap and water as soon as
possible after handling used oil.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take it in a sealed container
to your local service station for reclamation. Do not throw it in the
trash, pour it on the ground, or down a drain.
0.60 (0.63 US qt , 0.53 Imp qt)
OIL FILLER CAP
[REDUCTION GEAR OIL]
OIL FILLER CAP
20
6 ) and check the oil
[ENGINE OIL]
LEVEL
DRAIN
PLUG