Pre-Operation Check - probst SH-2500-UNI-B Instructions D'emploi

PRE-OPERATION CHECK

1. Engine oil level
Running the engine with insufficient oil can cause serious
engine damage.
Be sure to check the engine on a level surface with the engine
stopped.
1. Remove the oil filler cap and wipe the dipstick clean.
2. Insert the dipstick into the oil filler neck, but do not screw it in.
3. If the level is low, fill to the top of the oil filler neck with the
recommended oil.
Use Honda 4-stroke, or an equivalent
high detergent, premium quality mo-
tor oil certified to meet or exceed U.S.
automobile manufacturer's require-
ments for service classification SG, SF.
Motor oils classified SG, SF will show
this designation on the container.
SAE 10W-30 is recommended for gen-
eral, all temperature use. If single vis-
cosity oil is used, select the appropri-
ate viscosity for the average tempera-
ture in your area.
Using nondetergent oil or 2-stroke engine oil could shorten the
engine's service life.
OIL FILLER CAP/
DIPSTICK
LEVEL
6
Ambient temperature
SINGLE VISCOSITY
MULTI VISCOSITY