8.2.3 Lifting Wet Loads; 8.2.4 Downtime - probst SH-2500-UNI-B Instructions D'emploi

Système de préhension par aspiration
Masquer les pouces Voir aussi pour SH-2500-UNI-B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
SH 2500-UNI-B

8.2.3 Lifting wet loads

The lifting device is not intended for picking up wet stone slabs. When picking up wet stone slabs, please observe
the following:
Remove water from the suction surface.
Carry out the following points after working with damp parts:
Lift up the lifting device. Make sure that the area around the suction plate is clear and that no items or water can be
drawn in.
Let the pump idle to run dry for at least 5 minutes.
Then switch off the device.
Open the condensate drain screw on the bottom of the storage container. Drain the water completely and tighten
the drain screw securely.

8.2.4 Downtime

Store the device in a closed and frost-free room (not uncovered outdoors).
Pos: 23 /==== ===== ===== ===== ===== ===== == @ 0\mod8_2. doc @ 5159 @
Pos: 24 / 99 geräte spez. M odule/ PG2 Va kuum - Verle ge systeme /SH UNI 2500 b/F ehler suc he SH uni 2500 b/SH... @ 0\m od17 6_2. doc @ 8215 @ 1
25 / 32
Operating
condensate drain screw
V7
GB

Publicité

Table des Matières
loading

Table des Matières