Special Care Instructions - Kenwood kMix KMX75 Instructions

Glass is a natural material, during the manufacture
of this bowl every care has been taken to ensure a
perfect appearance, however some small imperfections
may be visible, this is normal and to be expected, the
performance of the bowl will not be affected.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your
appliance.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended
to come into contact with food.
Before Using For The First Time
Wash the parts: see 'Care and
Cleaning' section.
Key
Mixer head
1
Attachment outlet
2
Outlet cover
3
Tool socket
4
Bowl
5
a Stainless steel (if supplied)
b Glass (if supplied)
On/Off and speed control
6
Mixer ready indicator light
7
Mixer body
8
Head release lever
9
Cord storage
10
K-beater
11
Whisk
12
Dough tool
13
Creaming beater (if supplied)
14
Folding tool (if supplied)
15
Spatula
16
Splashguard
17

Special Care Instructions

To Use Your Mixer
1 Lift the head release lever
back of the Stand mixer
the same time lift the head
it locks in the raised position
2 Place the required tool into the
socket. Then push up
turn the tool to lock into
position.
3 Fit the bowl onto the base. Place
the handle directly over the unlock
,
symbol then gently turn the bowl
clockwise until the handle is directly
above the lock symbol
USE excessive force and DO NOT
overtighten
4 Lift the head release lever
back of the Stand mixer and at the
same time lower the mixer head
5 Plug into the power supply and
the 'mixer ready indicator light' will
illuminate.
6 Switch on by turning the speed
control to the desired setting.
7 Release the tool by turning
clockwise to unlock from the tool
socket and then remove.
4
at the
and at
until
.
and
.
DO NOT
.
at the
.